Arlo Error Code 4208

The Ultimate Guide to Resolving Arlo Error Code 4208

Byadmin

Are you encountering Arlo Error Code 4208? Well, it can be quite frustrating. This issue can irritate you a lot, especially, when you entirely depend on your security cameras for seamless monitoring. Typically, this error signals a connectivity or configuration issue that prevents the Arlo surveillance system from functioning properly.

Do you have any idea about what this code exactly requires? If not, worry not. Simply put, it is all about the requirement for prompt attention so that you can restore your security setup. Wanna get your system back on track more efficiently? Or are you willing to avoid recurring disruptions? If yes, you need to understand its common triggers properly.

To know more, keep reading this blog carefully…….

This error is one of the most annoying ones. It signifies a failure in upgrading the Arlo device firmware. Most of the time, the message states that “Firmware could not be updated. Please try again later.”  It can occur during automatic updates. Typically, it is scheduled between 3 a.m. and 5 a.m. On the other hand, manual updates begin through the Arlo app or web portal.

Why You’re Seeing Arlo Error Code 4208

Are you curious to be aware of the common causes for Arlo Error Code 4208? Don’t you know what this issue is? If yes, you are in the right place. This error is a common issue that most Arlo users encounter. Mostly, it is concerned with failed firmware updates.  

So, without beating about the bush, let’s scroll down and try to understand why it occurs –

1. Weak or Unstable Internet Connection

Undoubtedly, firmware updates need a stable and fast internet connection. In case, your Wi-Fi signal is weak, and fluctuates, then the procedure can not be accomplished successfully. Due to the disconnection during the update, you have to suffer from the Arlo error 4208.

Causes of Weak Connection:

  • Your Arlo camera is placed remotely from the router.
  • Signal interruption with walls, furniture, or other electronic devices.
  • Bandwidth congestion due to multiple devices connected to the same network.

2. Low Battery Levels

The Arlo surveillance system runs on batteries. It requires ample power for executing firmware updates. In case the battery is too low, the device will not have the energy to accomplish the upgrading procedure.

Why This Happens:

  • If the firmware updates are resource-intensive. As an outcome, it starts draining the battery faster.
  • Users start to neglect taking care of the battery levels of their devices. They don’t do it before initiating the update.

3. Firmware Download or Installation Errors

Errors can occur during the download or installation phase of the firmware update due to corrupted files or interrupted processes.

Reasons for the Issue:

  • Power interruptions during the update.
  • Server issues on Arlo’s end. Later on, it causes incomplete downloads.
  • Firmware versions are incompatible.

4. Outdated Arlo App or Firmware

Are you utilizing an outdated Arlo app? If so, there may be several communication errors between the app and the devices as well. Ao, it leads to errors during firmware updates –

How This Happens:

  • Sometimes, users forget to upgrade to the latest version of the app. It is all because of storage issues or not being aware of the things that you need to be.
  • Your device’s firmware has become incompatible with the requirements of the latest system. 

5. Network Configuration Issues

Due to the inappropriate network settings, you have to confront a lot of unwanted interruptions. This way, you will not be able to connect to servers and perform updates as well. The incorrect network settings involve – blocked ports or improper firewall configurations. 

Why This Happens:

  • The latest security settings
  • Firewalls block communication between the device and Arlo servers.
  • Router settings may not be supportive of the UDP and TCP ports that are required for firmware updates.

6. Overloaded or Congested Servers

In some cases, many users attempt to upgrade their devices simultaneously. Later on, there can be observed unnecessary load on the Arlo servers. It will result in failed firmware updates.

Why This Happens:

Firmware updates are generally rolled out across the globe. It will cause heavy traffic on servers.

7. Device Glitches or Software Bugs

There can be various glitches or software bugs in the Arlo device or base station. But these errors are for a short time. Unfortunately, they interrupt the firmware upgrading procedure. As an outcome, you have to encounter Arlo Error Code 4208 –

Why This Happens:

  • The software of your device may not respond properly. It is all because of the incomplete updates
  • If your devices are overheating during the upgrading procedure 

8. Insufficient Storage on the Device

Firmware updates may need additional temporary storage space for downloading and installing the new files. In case the internal storage of your device is full, the update may fail. 

Why This Happens:

  • Event recording in an excessive amount
  • Unwanted logs

9. Improper Device Synchronization

Sometimes, Arlo cameras are not properly synchronized with the base station or the SmartHub. Due to this disruption, you will not be able to install the firmware updates. 

Why This Happens:

The key reason for the weak communication between the base station and the camera is excessive distance or interference.

10. Outdated Network Hardware

If your router or modem is older, it may not support the latest requirements for firmware updates. It leads to several connectivity issues and errors. 

Why This Happens:

Older or outdated hardware may not have the bandwidth. It may also happen due to the lack of firmware support for the latest IoT devices.

Note: In short, by understanding the list of above-given causes, you can easily minimize the chances of the occurrence of Arlo Error Code 4208. Apart from that, you can also ensure a smoother firmware update procedure for your devices.

How To Fix Arlo Error Code 4208

Generally, the Arlo error code 4208, indicates the issues encountered during firmware updates. Once you initiate addressing this issue, you will realize that you need a step-by-step approach to diagnose and resolve the potential issues. Here are the detailed solutions that will definitely help you to resolve the error completely –

1. Check Your Internet Connection

  1. First of all, you need to ensure that your Wi-Fi is stable. You also have to check that it has sufficient speed. For the smoothest operation of your device, the speed should be at least – 2 Mbps.
  2. In the next step, move the Arlo device closer to your router. It will be helpful to you to avoid weak signals.
  3. After that, disconnect other devices from the network. This way, you can reduce bandwidth congestion during updates.
  4. Thereafter, perform a speed test so that you can confirm internet stability. For this, it will be worth using a reliable tool like “Speedtest.net.”
  5. In case you are using mobile data, you have to switch to a Wi-Fi network. This is because sometimes the cellular signals can be inconsistent.

2. Ensure Device Power Levels Are Sufficient

  1. Initially, charge your Arlo device completely before going to initiate an update.
  2. If you have battery-operated devices, you have to replace low or damaged batteries with new ones.
  3. Suppose, it is possible for you, then connect the device directly to a power outlet. For this, you can use an adapter.
  4. Now, it is the right time to check the battery status. For this, you have to go through the Arlo app. It will help you to confirm that it is above 50%.

3. Restart Your Arlo Device and Base Station

  1. At the beginning of the restarting process, turn off the Arlo camera. For this, it will be better for you to remove the battery or unplug it.
  2. In the next step, restart the base station by unplugging it from the power outlet. 
  3. Wait for 30 seconds and after that plug it back in.
  4. Later on, reinsert the battery into the camera. After that, you will be able to power it on once again.
  5. Finally, give permission to both devices so that they can synchronize completely before you attempt another update.

4. Verify Firmware Compatibility

  1. In the first step, open the Arlo app.
  2. Now, navigate to Settings > Device Info.
  3. After that, check the current firmware version of your device.
  4. Thereafter, visit the Arlo support site. It will help you to confirm that the latest update is compatible with your model.
  5. In case, the version is mismatched, you have to update your app. On the other hand, you can also prefer to download the firmware manually.

5. Manually Update the Firmware

  1. Firstly, log into your Arlo account either on the web portal or app.
  2. In the next step, go to “Settings > Firmware Update.”
  3. After that, download the latest firmware manually if auto-updates fail.
  4. In this step, you need to follow the on-screen instructions so that you can install the update more conveniently.
  5. Now, it’s time to ensure that the devices stay powered and connected to the internet during the upgrading procedure.

6. Resolve Network Configuration Issues

  1. At the beginning of the process, log into your router’s admin panel. Usually, you can access it via 192.168.1.1 or similar.
  2. Now, check that ports 80 and 443 are open, it is because they are required for Arlo updates.
  3. It is essential for you to temporarily disable firewalls or advanced security settings. This may also block firmware downloads.
  4. Later on, switch the DNS settings to a public DNS like Google (8.8.8.8 and 8.8.4.4).
  5. Last but not least, reboot your router so that you can apply the changes.

7. Free Up Device Storage

  1. In the first step, open the Arlo app.
  2. Now, check for excessive recordings or data that is stored locally.
  3. After that, delete old or unnecessary recordings from the library.
  4. Thereafter, enable cloud storage but only when your subscription allows it.
  5. Finally, check if additional memory cards or storage devices need to be in a proper format.

8. Perform a Factory Reset

  1. To kick-start the process of resetting your device, locate the reset button on the Arlo base station or camera.
  2. In the next step, you have to press and hold the button for 10-15 seconds. You have to perform this process until the LED blinks.
  3. Later on, re-add the device to your Arlo account with the use of the app.
  4. In the final step, you need to attempt the firmware update again.

9. Check Arlo’s Server Status

  1. For the proper verification procedure of Arlo’s server status, you have to visit the official Arlo status page. On the other hand, you can also check their social media accounts.
  2. In this step, you need to look for announcements related to server outages or maintenance.
  3. Finally, it is the right time to wait until the servers are operational before retrying the update.

10. Contact Arlo Support

  1. In the last step, you have to gather relevant information. It includes – your device model, current firmware version, and error details.
  2. After doing so, you need to reach out to Arlo’s support team via their app, website, or helpline.
  3. Once you get in touch with Arlo’s support team, you have to follow the troubleshooting steps provided by their technicians.

Tip: It is a harsh truth that devices like smartphones or computers are utilized to manage Arlo systems. If there is an issue with these devices, then there will also be interruptions with the updates as well. You always need to be confirmed that your app, OS, and browser are updated to their latest versions. 

Final words, 

Hopefully, after following the solutions given above, you can resolve Arlo Error Code 4208 more effectively. This is the way you can restore the functionality of your device. 

Also Read: Arlo Camera Not Working and How to Fix